Home

Magnetic Assemblies

Specification of Magnet

Process pieces

Processing plant

Other Products

• Magnetic Inkjet Paper
• Fridge Magnet
• Pole Identifier
• Magnet Rollers
• Electro solenoid

Other Products >> electro solenoid

Rotary-solenoids

At the outer housing of the rotary solenoid or on the surface of gag bit is pressed a special slideway, and with the rolling movement of the steel balls within the slideway, the axially linear movement of the solenoid will be converted into a rotary movement along fixed direction and angle. Both the slideway and the contact area of the steel balls have undergone a special process, thus feature a hardness of more than HRC62, and the hardness layer has a depth of more than 0.3mm.

If your revolving device consists of motor, cam, winch and connecting rod, then by using rotary solenoid, the original mechanism can be largely simplified and the reliability is greatly improved as well.

We welcome custom design or your special requirements.

Features:

1. Low power consumption; moderate torque output
2. Completely enclosed design with a variety of mounting and shaft configurations
3. High speed cycle rate; can provide closed loop velocity and position control
4. Quiet, shock-free operation; true rotary motion with no axial displacement

Specifications:

Type	Diameter	Height	Angle					Torque
	[mm]	[mm]	25°	35°	45°	70°	95°	[N·m]
YXR340	34	30	☆	☆	☆	☆	-	0.31
YXR400	40	34	☆	☆	☆	☆	☆	0.52
YXR490	49	43	☆	☆	☆	☆	☆	1.39
YXR491	49	43	☆	☆	☆	☆	☆	1.54
YXR590	59	55	☆	☆	☆	☆	☆	3.2
YXR591	59	61	☆	☆	☆	☆	☆	3.45
Note	1、The height mentioned above is standard that excludes the iron core dimension, and the moving core can be adjusted according to particular requirements.
	2、The torque mentioned above is a result when operation is done at 25° and the temporary loading rate is 10%.