Other Products >> Electro solenoid
Open-Frame-Solenoids
Open frame solenoid can also be classified as push-and-pull electromagnet; because of its high efficiency in winding space, effective heat dissipation and open coil, it features simple structure, low cost, high efficiency and other disadvantages, it?s an economical product.
Open frame solenoid being cycled on and off. When the solenoid is energized the PLUNGER will be attracted to the STOP. The majority of the elecromagnets are open frame or 'D' frame valves.
We welcome custom design or your special requirements.
Features:
- Open frame solenoid is simple structured, of large power, nice heat-dissipation, with magnetic conductor as its frame, having an open coil and long travel course.
- Small and compact structure, easy to install and connect, with a convenient-to-maintain linear moving electromagnet, this type of solenoid will work externally by pulling in/close the sliding pole or pushing out the mandril
- With a 2mm-20mm diameter iron core
- Can be widely used in different industrial automated equipments, or separation systems for different production lines
Specifications:
| Type | Width | Height | Length | Course | Load |
| [mm] | [mm] | [mm] | [mm] | [N] | |
YXF10-31 |
15 | 10 | 31 | 0→6 | 5.5 |
YXF15-35 |
18 | 15 | 35 | 0→6 | 13 |
YXF24-34 |
38(*) | 27 | 34 | 1→6 | 20 |
YXF24-40 |
29 | 24 | 40 | 0.5→6 | 30 |
YXF26-60 |
31 | 26 | 60 | 0.5→12 | 41 |
YXF44-74 |
51 | 44 | 74 | 0.5→24 | 51 |
Note |
1、The length mentioned above is standard that excludes the iron core dimension, and the moving core can be adjusted according to particular requirements. |
||||
2、The load mentioned above is a result when operation is done at a minimum travel course and the temporary loading rate is 10%. |
|||||
3、YXF24-34A product is equipped with installation face. |
|||||
Magnetic Materials Ind. Co.,Ltd. All Rights Reserved.