Specification of Magnets >> Ferrite Magnet
Cap Magnet
These cap magnets offer substantially more holding power than their ceramic cousins. cup magnets are wide and shallow, with the north and south poles on the same plane, offering the ultimate in gripping power. Supplied with a center hole to increase their flexibility in use.
| Code | OD × H× [ ID ] | T | Holding Force |
Remarks |
| 12R | 12.3Φ × 3.7 | 0.5 | 0.3kg |
Zn plated/ Unichrome treated |
| B12R | 12.3Φ × 3.7 | 0.5 | 0.1kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| B15R | 15Φ × 4 | 0.8 | 0.2kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 16R | 16Φ × 3 (2.7Φ ) | 0.7 | 0.5kg |
Zn plated/ Unichrome treated |
| 18R | 17.5Φ × 5 | 0.7 | 0.8 kg |
Zn plated/ Unichrome treated |
| B18R | 17.5Φ × 5 | 0.8 | 0.4 kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 20R | 19.8Φ × 4 (3.5Φ ) | 0.8 | 1.5 kg |
Zn plated/ Unichrome treated |
| 23R | 22.8Φ × 5.2 | 1.0 | 2.2 kg |
Zn plated/ Unichrome treated |
| 23RH | 22.8Φ × 5 (5Φ ) | 0.9 | 2.2 kg |
Zn plated/ Unichrome treated |
| 24R | 23.5Φ × 5 | 0.8 | 2.4 kg |
Zn plated/ Unichrome treated |
| B24R | 23.5Φ × 5 | 0.8 | 0.5 kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 25R | 25.5Φ × 5 (3.2Φ ) | 0.8 | 1.8 kg | Zinc black coating |
| 28R | 28.8Φ × 5.6 | 1.0 | 3.5 kg |
Zn plated/ Unichrome treated |
| B28R | 28.8Φ × 5.6 | 1.0 | 1.5 kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 32R | 31.5Φ × 4.7 (4.3Φ ) | 0.8 | 4.0 kg |
Zn plated/ Unichrome treated |
| B32R | 31.5Φ × 4.7 | 0.8 | 1.6 kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 36R | 36Φ × 7.5 | 1.6 | 6.0 kg |
Zn plated/ Unichrome treated |
| 36RH | 36Φ × 7.5 (4.2Φ ) | 1.6 | 6.0 kg |
Zn plated/ Unichrome treated |
| 44R | 44Φ × 8 (M4 ) | 1.6 | 11.0 kg |
Zn plated/ Unichrome treated |
| B44R | 44Φ × 8 (M4 ) | 1.6 | 2.5 kg |
Zn plated/ Unichrome treated/ Isotropic Ba-Ferrite |
| 50R | 50Φ × 8.5 (5Φ ) | 1.6 | 14.0 kg |
Zn plated/ Unichrome treated |
| 52R | 51.5Φ × 7.9 (4.9Φ ) | 1.6 | 15.0 kg | CR plated |
| 66R | 66Φ × 9.8 (9.5Φ ) | 2.0 | 25.0 kg | CR plated |
| 66RS | 66Φ × 9.8 (6.2Φ ) | 2.0 | 25.0 kg | CR plated |
| 77R | 76.5Φ × 11 (6.2Φ ) | 2.0 | 35.0 kg | CR plated |
| 78R | 78Φ × 11 (8ΦÅ\3Φ ) | 2.0 | 35.0 kg |
Zn plated/ Unichrome treated |
| 80R | 80Φ × 12.7 (10.2Φ ) | 2.0 | 40.0 kg | CR plated |
| 80RS | 80Φ × 10.5 (7.2Φ ) | 2.0 | 40.0 kg | CR plated |
| 98R | 98Φ × 12.5 (9.5Φ ) | 2.0 | 50.0 kg | CR plated |
| 125R | 124.5Φ × 12.4 (12.7Φ ) | 2.0 | 100.0 kg | CR plated |
- Cap Material,SPCC
- The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)
| Code | L × W × H | T | Holding Force |
Remarks |
| 20L | 20 × 8.4 × 4.2 | 0.6 | 0.8kg |
Zn plated/ Unichrome treated |
| 24L | 24 × 12 × 5.1 | 0.8 | 2.0kg |
Zn plated/ Unichrome treated |
| 25LH | 25.5 × 23.5 × 6.5 (6Φ ) | 1.4 | 3.0kg |
Zn plated/ Unichrome treated |
| 25L | 25.5 × 23.5 × 6.5 | 1.4 | 3.5kg |
Zn plated/ Unichrome treated |
| 26L | 25.5 × 11 × 6.5 | 1.0 | 2.0kg |
Zn plated/ Unichrome treated |
| 32LH | 32 × 15.7 × 7.8(3.2Φ ) | 1.5 | 1.0kg | Zinc yellow coating |
| 36L | 36 × 21× 6 | 1.0 | 3.5kg |
Zn plated/ Unichrome treated |
| 43LH | 43 × 30.2 × 7(6Φ ) | 1.6 | 8.5kg |
Zn plated/ Unichrome treated |
| 43L | 42.8 × 28 × 6.5 | 1.2 | 8.0kg | Zinc yellow coating |
| 45L | 45 × 30 × 7 | 1.6 | 13.0kg |
Zn plated/ Unichrome treated |
| 49L | 49 × 41 × 13 | 2.0 | 20.0 kg |
Zn plated/ Unichrome treated |
| 49LH | 49 × 41 × 12.8(M5 ) | 2.0 | 17.0kg |
Zn plated/ Unichrome treated |
| 60L | 60 × 23.8 × 6.8 | 1.4 | 13.0kg |
Zn plated/ Unicrome treated/ A square hole on each end |
| 79L | 79 × 38 × 13 | 2.0 | 23.0kg |
Zn plated/ Unicrome treated/ A square hole on each end |
| 90L | 90 × 18.8 × 6 | 1.2 | 9.0kg |
Zn plated/ Unicrome treated/ A 3.5Φ hole on each side |
- Cap Material,SPCC
- The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)
| Code | L × W × H | T | Holding Force |
Remarks |
| 28LF | 28.5 × 15.5 × 4.5 | 1.2 | 2.0kg | Double faced adhesive tape/ Zinc black coating |
| 43.5L | 43.5 × 30.1 × 7 | 1.5 | 6.0kg |
Double faced adhesive tape/ Protect Film
covered/ Zn plated/ Unicrome treated |
| 48L | 48 × 45 × 12.5 | 2.0 | 18.0kg |
Double faced adhesive tape/ Protect Film
covered/ Zn plated/ Unicrome treated |
| 50L | 50 × 27 × 12 (5Φ× 2 ) | 1.6 | 14.0kg | M4 Counter sunk/ Zn plated |
| 45LP | 45 × 30 × 7 | 1.6 | 13.0kg |
Double faced adhesive tape/ Protect Film
covered/ Zn plated/ Unicrome treated |
| 47LP | 46.8 × 30 × 7.7 | 1.8 | 13.0kg |
Zn plated/ Unicrome treated/ Protect Film covered/ 2 claws on one side |
| 51LP | 51 × 30.4 × 2 | 1.5 | 13.0kg |
Zn plated/ Unicrome treated/ Protect Film covered |
| 80L | 80 × 25 × 7.1 | 1.6 | 17.0kg | Zinc yellow coating/ Protect Film covered |
- Cap Material,SPCC
- The pitch between two holes of 50L type is 25. The double faced adhensive tape is a VHB tape, producted by Sumitomo 3M
- The magnetic absorption is a value for reference ( Measured by Imada Digital Force Gage)
Magnetic Materials Ind. Co.,Ltd. All Rights Reserved.